High Spec CNC Factory Closure – Variety of Haas Lathes and Mills, Turning Centres, EDM & Inspection Equipment
Starts: 19 May 2026 at 16:30 BST
Ends: 30 June 2026 at 15:00 BST
Large CNC manufacturing closure with many more lots still to come. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 377 of 377 lots
- LOT 1
![site]()
2020 Haas UMC-750 CNC 5 Axis Vertical Machining Centre
Table Dimension Ø500mm (7 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=762mm, 'Y'=508mm, 'Z'=508mm, 'B'=-35° To +120°, 'C'=360°. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=22.9m/min, 'Y'=22.9m/min, 'Z'=22.9m/min, 'B'=50°/sec, 'C'=50°/sec. Maximum Cutting Feed 16,5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 40 + 1 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 305mm, Maximum Tool Weight 5.4kg. S/No. 1172799 (2020). - LOT 3
![site]()
2018 Haas ST-25 CNC Slant Bed Lathe
Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). - LOT 5
![site]()
2016 Haas ST-35 CNC Slant Bed Lathe
Samchully MH-212 Ø315mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8.12 Station Turret. S/No. 31004618 (2016). - LOT 6
![site]()
2016 Haas VF 2SS CNC Vertical Machining Centre With Haas TR160 4/5th Axis Table
Table Size 914mm x 356mm (3 'T' Slots 16mm Wide x 125mm Pitch). Table Load 680kg. Axis Travel 'X'=762mm, 'Y'=406mm, 'Z'=508mm. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 279mm, Maximum Tool Weight 5.4kg. Haas 4/5th Axis Table 'T' Slotted Ø160mm Faceplate, Distance Between Trunnions 470mm, Maximum Tilt Angle -120° /+120°. S/No. 1134269 (2016). - LOT 7
![site]()
2014 Haas ST-30 CNC Slant Bed Lathe
Kitagawa B-210 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø76mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø88.9mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. S/No. 3097882 (2014). - LOT 9
![site]()
2017 Haas ST-15 CNC Slant Bed Lathe
Ø85mm Collet Chuck. Maximum Swing Ø419mm. Maximum Cutting Length (Varies With Workholding) 406mm. Bar Capacity Ø64mm. Axis Traverses 'X'=200mm, 'Z'=406mm. Rapid Traverses 'X'=30.5m/min, 'Z'=30.5m/min. Spindle Bore Ø88.9mm. Maximum Spindle Speed 4,000rpm (14.9kW Motor). Spindle Nose A2-5. 12 Station Turret. S/No. 3107324 (2017). - LOT 10
![site]()
2015 Haas VF 3SS CNC Vertical Machining Centre
Table Size 1,219mm x 457mm (5 'T' Slots 16mm Wide x 80mm Pitch). Table Load 794kg. Axis Travel 'X'=1,016mm, 'Y'=508mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1119704 (2015). - LOT 12
![site]()
2011 Haas VF 3SS CNC Vertical Machining Centre
Table Size 1,219mm x 457mm (5 'T' Slots 16mm Wide x 80mm Pitch). Table Load 794kg. Axis Travel 'X'=1,016mm, 'Y'=508mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1083417 (2011). - LOT 13
![site]()
2007 Studer S21 CNC Cylindrical Grinder With GE Fanuc Series 21i-TB Control & MPM Digital Balancer
Distance Between Centers 400mm. Centre Height 125mm. Maximum Workpiece Weight Between Centres 30kg. 'X' Axis- Maximum Travel 254mm, Feed 0,001-5,000mm/mìn, Resolution Rotational Measuring System 0,0001mm, Distance Between Guideways 280mm. 'Z' Axis- Maximum Travel 483mm, Feed 0,001-10,000mm/mìn, Resolution Rotational Measuring System 0,0001mm, Distance Between Guideways 200mm. Wheelhead-Swivel Range -15 to +195°, Manual Swivelling Axis 2.5° Hirth, Automatic Swivelling Axis 1° Hirth, Fine Adjustment 0.0001°, Fitting Taper Ø63mm, Drive Power 5.5kW, Grinding Wheel Dimension (Left) Ø400 x 40 x Ø127mm, Grinding Wheel Dimension (Right) Ø400 x 40 x Ø127mm. Circumferential Speed Up To 50m/s, lnternal Grinding Device For High-Frequency Spindles Locating Bore Ø120mm, Speeds 24,000-120,000rpm. Workhead Speed Range 1-1,500rpm. Tailstock MT3, Quill Travel 35mm, Quill Ø50mm. S/No. 039 (2007). - LOT 14
![site]()
2014 Haas VF 2SS CNC Vertical Machining Centre With Haas 4/5th Axis Table
Table Size 914mm x 356mm (3 'T' Slots 16mm Wide x 125mm Pitch). Table Load 680kg. Axis Travel 'X'=762mm, 'Y'=406mm, 'Z'=508mm. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 279mm, Maximum Tool Weight 5.4kg. Haas 4/5th Axis Table 'T' Slotted Ø160mm Faceplate, Distance Between Trunnions 470mm, Maximum Tilt Angle -120° /+120°. S/No. 1118479 (2014). - LOT 17
![site]()
2013 Haas VF 2 CNC Vertical Machining Centre
Table Size 914mm x 356mm (3 'T' Slots 16mm Wide x 125mm Pitch). Table Load 1,361kg. Axis Travel 'X'=762mm, 'Y'=406mm, 'Z'=508mm. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=25.4m/min, 'Y'=25.4m/min, 'Z'=25.4m/min. Maximum Cutting Feed 16.5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 20 Position ATC. Maximum Tool Ø89mmximum Tool Length 279mm, Tool Weight 5.4kg. S/No. 1108180 (2013). - LOT 18
![site]()
2018 Behringer HBE 261A CNC Automatic Horizontal Bandsaw With Roller Conveyors
Cutting Range 90° Round Ø260mm, 90° Flat 300 x 260mm, Smallest Ø10mm, Smallest Flat 10 x 8mm. Feeding Length Single Stroke 650mm. Drive Power 2.6kW. Blade Speed 15-110m/min. Saw Blade Dimensions 4,440 x 34 x 1.1mm. Rest Piece Length In Automatic Operation 70mm. Total Power 3.7kW. Saw Feed- Servo-Feed Via Ballscrew, Material Feed- Ballscrew, Material Clamping- Hydraulic, Saw Blade Cleaning- Electrically Driven Chip Brush. S/No. 10013353 (2018). - LOT 20
![site]()
2010 Fanuc Robodrill α-21iFLA High Speed CNC Vertical Machining Centre With Fanuc Series 31i-Model A5 Control & Nikken 4th Axis Unit
Table Dimension 700 x 410mm (3 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=700mm, 'Y'=400mm, 'Z'=330mm. Rapid Traverse 'X,Y,Z'=54m/min. Maximum Spindle Speed 10,000rpm. Spindle Taper ISO 30. 21 Position ATC. Nikken 4th Axis Unit Ø105mm Faceplate, Centre Height 150mm. S/No. P101XH169 (2010). - LOT 21
![site]()
2006 Fanuc Robodrill α-21iEL High Speed CNC Vertical Machining Centre With Fanuc Series 31i-Model A5 Control & Nikken 5AX130FA 4/5th Axis Unit
Table Dimension 850 x 410mm (3 'T' Slots). Maximum Table Load 250kg. Axis Travel 'X'=700mm, 'Y'=400mm, 'Z'=330mm. Rapid Traverse 'X,Y,Z'=54m/min. Maximum Spindle Speed 24,000rpm. Spindle Taper ISO 30. 21 Position ATC. Nikken 4/5th Axis Unit Ø105mm Faceplate, Centre Height 150mm. S/No. P064VH617 (2006). - LOT 24
![site]()
2011 Haas TM 2P CNC toolroom Vertical Machining Centre
Table Size 1,466mm x 267mm (3 'T' Slots 16mm Wide x 101.6mm Pitch). Table Load 454kg. Axis Travel 'X'=1,016mm, 'Y'=406mm, 'Z'=406mm. Distance From Spindle Nose To Table 508-102mm. Rapid Traverse 'X'=10.2m/min, 'Y'=10.2m/min, 'Z'=10.2m/min. Maximum Cutting Feed 10.2m/min. Maximum Spindle Speed 6,000rpm (5.6kW Motor). Spindle Taper BT40. 10 Position ATC. Maximum Tool Ø89mm, Maximum Tool Weight 5.4kg. Note: Needs Attention. S/No. 1087214 (2011). - LOT 26
![site]()
2006 Agie Agiecut Progress 2 Wire Cutting EDM With Agie Vision Cut Software
Maximum Workpiece Dimension 750 x 550 x 250mm High. Maximum Workpiece Weight 200kg. Axis Travel 'X'=350mm, 'Y'=250mm, 'Z'=256mm, 'U,V'=100mm. Maximum Taper Angle +/- 30°. Wire Dimension Range 0.10-0.33mm. S/No. 314 ((2006). - LOT 27
![site]()
2006 Agie Agietron Hyperspark 2 CNC Die Sink EDM With Hyperspark Software
Table Dimension 600 x 450mm. Maximum Table Load 400kg. Axis Travel 'X'=350mm, 'Y'=250mm, 'Z'=350mm. Tank Dimension 860 x 420mm. 30 Position ATC. S/No. 300 (2006). - LOT 28
![site]()
2002 Agie Agiecut Challenge 3 Wire Cutting EDM With Agie Vision Cut Software
Maximum Workpiece Dimension 1,050 x 650 x 250mm High. Maximum Workpiece Weight 400/800kg. Axis Travel 'X'=500mm, 'Y'=350mm, 'Z'=256mm, 'U,V'=±70mm. Maximum Taper Angle +/- 30° @ 100mm High. Wire Dimension Range 0.10-0.33mm. Note: Needs Attention. S/No. 259 (2002). - LOT 29
![site]()
1999 Schaublin 125-CCN Flat Bed CNC Lathe With GE Fanuc Series 18i-T Control
Collet Chuck. Maximum Swing Ø270mm. Centre Height 125mm. Swing Over Cross Slide Ø115mm. Approx Turning Length 420mm. Distance Between Centres 700mm. Speed Range 0-5,000rpm. Dual QTC. S/No. 340382 (1999). - LOT 30
![site]()
1998 Schaublin 125-CNC Swiss Flat Bed CNC Lathe With GE Fanuc Series 18i-T Control
Bison Ø125mm 3 Jaw Chuck. Maximum Swing Ø270mm. Centre Height 125mm. Swing Over Cross Slide Ø115mm. Approx Turning Length 420mm. Speed Range 0-5,000rpm. Dual QTC. S/No. 338809 (1998). - LOT 33
![site]()
Baty R600 Profile Projector With Quadra-Chek 2000 DRO
Ø600mm Screen with 90° Cross Lines. Work Table Dimension 450 x 200mm (2 'T' Slots), 15° Table Rotation For Thread Inspection. Lens Magnification Range x5, x10, x20, x25, x50, x100. S/No. 603815. - LOT 34
![site]()
2014 Haas VF 2 CNC Vertical Machining Centre (Spares/Repair)
Table Size 914mm x 356mm (3 'T' Slots 16mm Wide x 125mm Pitch). Table Load 1,361kg. Axis Travel 'X'=762mm, 'Y'=406mm, 'Z'=508mm. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=25.4m/min, 'Y'=25.4m/min, 'Z'=25.4m/min. Maximum Cutting Feed 16.5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 20 Position ATC. Maximum Tool Ø89mm. Maximum Tool Length 279mm, Tool Weight 5.4kg. Note: Spares Or Repair. S/No. 1111299 (2014). - LOT 50
![site]()
Lumsden 92ML Vertical Rotary Surface Grinder
Ø1,200mm Magnetic Chuck. Approx Swing Ø1,500mm. Maximum Height Capacity 572mm. Ø711mm Segmented Wheel. Maximum Spindle Speed 570rpm. Table Speed 6 & 12rpm. With Power Feed & Coolant System. - LOT 51
![site]()
Lumsden 91ML Vertical Rotary Surface Grinder
Ø915mm Magnetic Chuck. Approx Swing Ø1,250mm. Ø555mm Segmented Wheel. Maximum Spindle Speed 700rpm. Table Speed 8 & 24rpm.With Power Feed & Dareth Magnetic Coolant Filtration System. - LOT 52
![site]()
Churchill RBY Vertical Rotary Surface Grinder
Ø635mm Magnetic Chuck. Approx Swing Ø780mm. Ø440mm Segmented Wheel. With Coolant Filtration System. Note: Motor Missing. - LOT 53
![site]()
Churchill RBY Vertical Rotary Surface Grinder
Ø635mm Magnetic Chuck. Approx Swing Ø780mm. Ø440mm Segmented Wheel. With Coolant Filtration System. - LOT 54
![site]()
Delapena Speedhone 'E' Electronic EM Horizontal Honing Machine
Bore Diameter Range Ø1-80mm. Speed Range 200-2,500rpm. With Quantity Of Hones. - LOT 55
![site]()
Jones & Shipman 540 Surface Grinder
Working Surface Of Table 457 x 152mm. Longitudinal Table Traverse 483mm. Cross Table Travel 168mm. Vertical Movement Of Wheel Head 280mm. Maximum Wheel Speed 2,850rpm (1.5kW Motor). Wheel Dimension Ø180 x 13 x Ø31.75mm. - LOT 57
![site]()
Jones & Shipman 1011 Surface Grinder
Approx Table Dimensions 685 x 280mm. Magnetic Chuck 600 x 300mm. Table Travel Longitudinal 685mm, Cross Travel 305mm, Vertical Wheelhead 310mm. Wheel Speed 2,100-2,700rpm. S/No. 61609. - LOT 58
![site]()
Jones & Shipman 1311 Universal Cylindrical Grinder With EMS202L DRO
Maximum Swing Ø254mm. Distance Between Centres 457mm. Centre Height 127mm. Grinding Wheel Dimension Ø305 x 25 x Ø127mm. Grinding Speed External 2,000-2,680rpm, Internal Upto 16,000rpm. Workhead Speed Range 90-320rpm. Table Swivel +20° To -19°. S/No. BO91638. - LOT 59
![site]()
Snow Vertical Rotary Surface Grinder
Ø635mm Magnetic Chuck. Approx Swing Ø780mm. Ø440mm Segmented Wheel. With Power Feed & Coolant Filtration System. - LOT 60
![site]()
Stenhoj 100 Vertical Hydraulic Press
Capacity 100 Ton. Cylinder Ø100mm. Distance Between Columns 1,080mm. Adjustable Height Under Ram 5 x 130mm Pitches. - LOT 61
![site]()
Hi-Power HPF 10042 Vertical Hydraulic Press
Capacity 100 Ton. Cylinder Ø100mm. Table 350 350mm. Distance Between Columns 1,080mm. Adjustable Height Under Ram 5 x 130mm Pitches. S/No. AA3966. - LOT 62
![site]()
Kardex SYS-250-3313.5-15 Industriever Vertical Tray Storage Unit
Load Per Tray 240-250kg. Maximum Load 8,050kg. Overall Dimensions L3,000 x W1,600 x H6,640mm. S/No. 96.009976/001 (1996). - LOT 63
![site]()
Boge S60-2 Compressor with Tundra 209 Air Dryer & Air Receiver
Working Pressure 8bar. Rate Of Flow 7m3/min. Motor 45kW. - LOT 64
![site]()
Fini Plus 11 Rotary Screw Compressor With DMC35 Refrigerated Air Dryer
Working Pressure10bar. Motor 11kW. 270 Litre Capacity Reciever. - LOT 65
![site]()
- LOT 66
![site]()
Baty R14-3200 Profile Projector with Acu-Rite DRO On Steel Table
Screen Dimension Ø310mm. Table Dimension 370 x 100mm (1 'T' Slot). S/No. 6512. - LOT 67
![site]()
Baty Shadowmaster R14XL Profile Projector with Heidenhain Quadra-Chek DRO On Steel Single Door Cabinet
Screen Dimension Ø310mm. Table Dimension 370 x 100mm (1 'T' Slot). S/No. 6366. - LOT 68
![site]()
Nikon V-12 Profile Projector With Nikon MC-102 DRO
Screen Dimension Ø305mm. Table Dimension 285 x 190mm (2 'T' Slots). - LOT 69
![site]()
- LOT 70
![site]()
Mitutoyo Ark-600 Digital Rockwell Hardness Tester (810-218E)
Preliminary Test Force 98.07N. Total Test Force 588.4N (60 kgf), (980.7N (100 kgf), and 1471N (150 kgf). Maximum Specimen Height 180mm. Throat 165mm. S/No. 181191. - LOT 71
![site]()
Mitutoyo LSM-6200 (LSM-503S0 Laser Scan Micrometer
Standard Range 0.3-30mm. Linearity Accuracy ±1µm, Repeatability ± 0.11µm. - LOT 72
![site]()
Guyson Beadblaster GE6 Bead Blast Cabinet
Approx Internal Dimensions W1,080 x D700 x H750mm. Rotary Table Ø600mm. With Powder Recovery Unit. S/No. 69271. - LOT 74
![site]()
Rofin Easymark IV F20 industrial-grade, desktop fiber laser marker
With PowerLine F 20W Pulsed Fiber Laser. Marking Area 120 x 120mm. Table Dimension 450 x 330mm (8 'T' Slots). S/No. 50032515. - LOT 75
![site]()
Lang Technik Makro-Grip 41350 Hydraulic Stamping Unit On Workbench with Mitutoyo Granite Table
Jaw Width 125mm. Mitutoyo Table Dimension 450 x 450 x 100mm. Workbench Dimension L1,180 x W600 x H830mm. - LOT 76
![site]()
Lang Technik Makro-Grip 47155 Grip Self Centering Vice
Jaw Width 125mm. Maximum Clamping Force 100Nm. - LOT 77
![site]()
Lang Technik Makro-Grip 47155 Grip Self Centering Vice
Jaw Width 125mm. Maximum Clamping Force 100Nm. - LOT 78
![site]()
- LOT 79
![site]()
2 Lang Technik Makro-Grip 47155 Grip Self Centering Vices On Base Plate
Jaw Width 125mm. Maximum Clamping Force 100Nm. Base Plate Dimension 340 x 180mm. - LOT 80
![site]()
Lang Technik Makro-Grip 47155 Grip Self Centering Vice
Jaw Width 125mm. Maximum Clamping Force 100Nm. With Spare Spindles. - LOT 82
![site]()
- LOT 83
![site]()
- LOT 84
![site]()
Allmatic Jacob Titan 2-M Heavy Duty Machine Vice
Jaw Width 125mm. Jaw Opening 0-504mm. Clamping Force 40kN. - LOT 88
![site]()
- LOT 89
![site]()
- LOT 90
![site]()
Allmatic Jacob Titan 125 Heavy Duty Machine Vice
Jaw Width 125mm. Jaw Opening 0-504mm. Clamping Force 40kN. - LOT 91
![site]()
- LOT 92
![site]()
- LOT 136
![site]()
- LOT 137
![site]()
- LOT 138
![site]()
- LOT 139
![site]()
Mitutoyo Digital Inspection Set In Plastic Case
Including 0-1, 1-2 & 2-3" Digital Micrometers, 150mm Digital Vernier Caliper & Digital depth Micrometer. - LOT 142
![site]()
- LOT 143
![site]()
- LOT 144
![site]()
- LOT 145
![site]()
Allmatic Jacob Titan 125 Heavy Duty Machine Vice
Jaw Width 125mm. Jaw Opening 0-504mm. Clamping Force 40kN. - LOT 149
![site]()
Granite Surface Table With Inspection Centres
Table Dimension 610 x 610 x 100mm. Centre Distance 14". - LOT 152
![site]()
- LOT 169
![site]()
- LOT 182
![site]()
- LOT 201
![site]()
(4) Mitutoyo Micrometers
Comprising: (1) Mitutoyo 293-331 Digital Micrometer 1"-2" Range. (1) Mitutoyo 293-346-30 Digital Micrometer 2"-3" Range. (1) Mitutoyo 293-341-30 Digital Micrometer 0-1" Range. (1) Mitutoyo .093"-1" Range 3 Point V Anvil Digital Micrometer. - LOT 203
![site]()
Assorted Inspection Equipment
Comprising: (4) Magnetic Bases with Mitutoyo 513-424, 513-415 & Mercer 313 Dial Gauges. Plus (2) V Blocks. - LOT 204
![site]()
(5) Mitutoyo Micrometers
Comprising: (3) Mitutoyo 293-832 Digital Micrometers 0-25mm Range. (1) 293-343-20 Digital Micrometer 3"-4" Range. (1) 293-222-30 Digital Micrometer 3"-4" Range. - LOT 205
![site]()
(6) Digital Micrometers
Comprising: (2) Mitutoyo 293-832 Micrometers 0-25mm Range. (1) Baty 50mm-75mm Range Micrometer. (1) Mitutoyo 293-331 Micrometer 1"-2" Range. (1) Mitutoyo 293-346-30 Micrometer 2"-3" Range. (1) Baty 75mm-100mm Range Micrometer. - LOT 206
![site]()
Assorted Inspection Equipment
Comprising: (3) 0-150mm Range Mitutoyo Digital Vernier Calipers. (2) 0-200mm Range Mitutoyo Digital Vernier Calipers. (1) 300mm Steel Rule. (1) Micrometer Stand. (2) V Blocks. - LOT 207
![site]()
Assorted Inspection Equipment
Comprising: (1) Mitutoyo 300mm/12" Height Gauge. (1) Verdict T3 Dial Test Indicator. (1) Moore & Wright Combination Set. Assorted Mitutoyo Setting Rods. - LOT 208
![site]()
(6) Mitutoyo Micrometers
Comprising: (2) Mitutoyo 293-340-30 Digital Micrometers 0-25mm Range. (2) 293-832 Digital Micrometers 0-25mm Range. (1) 293-343-30 Digital Micrometer 2"-3" Range. (1) 293-346 Digital Micrometer 2"-3" Range. - LOT 209
![site]()
Mitutoyo 511-715-20 Bore Gauge Set. Range 160mm - 250mm
Probe Depth 250mm, Graduation .01mm. - LOT 210
![site]()
Assorted Hand Tools
Comprising: (1) Garant 65 6050-60 Torque Wrench, 3/8" Sq Drive, 10-60Nm. Kamasa 1/2" Sq Drive Socket Set. Kennedy 1/2" Sq Drive Ratchet. - LOT 211
![site]()
Multi Draw Storage Cabinet with Indexable Carbide Inserts
Including Toolholders Spares & Fastening Keys. - LOT 212
![site]()
Multi Draw Storage Cabinet with Indexable Carbide Inserts
Including Indexable Carbide Threading Inserts, VCMT Turning Inserts & Iscar Sumocham Drill Inserts. - LOT 213
![site]()
Mitutoyo Inspection Equipment
Comprising: (1) 112-153 Point Micrometer 0-25mm Range. (1) 103-142-10 Micrometer 125mm-150mm Range. (1) 103-143-10 Micrometer 150mm-175mm Range. Assorted 511 Series Small Hole Bore Gauges. - LOT 214
![site]()
(4) Mitutoyo Micrometers
Comprising: (2) 126-126 Interchangeable Anvil Screw Thread Micrometers 25mm-50mm Range. (1) 117-101 Uni Micrometer 0-25mm Range. (1) 126-125 Interchangeable Anvil Screw Thread Micrometer 0-25mm Range. - LOT 216
![site]()
Cast Iron Adjustable Dial Clock Stand with Mercer Type 40 Dial Clock
Including Cast Iron Plate 200mm x 300mm. - LOT 217
![site]()
Assorted V Blocks
Comprising (1 Pair) V Blocks 155mm x 110mm x 100mm & (1 Pair) V Blocks 90mm x 55mm x 60mm. - LOT 222
![site]()
Assorted Indexable Toolholders
Including Iscar Grooving & Multi Directional Turning Toolholders & Unused Iscar HFAIL 40 Heliface Face Grooving Indexable Holders. - LOT 224
![site]()
1 Lot Assorted Tooling
Comprising: (1) Bison Ø100mm 3 Jaw Manual Chuck with Key. (1) 70mm Width of Jaw Toolmaker's Vice. - LOT 225
![site]()
- LOT 231
![site]()
1 Lot Assorted Iscar Indexable Holders
Including Iscar TGTBQ 20R-D52-JHP MultiFgrip Holders & Blades. Parting Off Holders, Blades & Blocks. - LOT 234
![site]()
- LOT 236
![site]()
- LOT 238
![site]()
1 Lot Assorted Indexable Toolholders
Including (1) Kennametal 5.34050-048168 HTS Shank. (1) Kennametal 5.34050-04048 Shank, 78-84mm Holder & Inserts. Indexable Carbide Inserts DFT 06T308GD Grade KCU40 & Pilot Drill to suit. - LOT 240
![site]()
(2) Iscar Whisper Line AV-D25/16 Anti Vibration Indexable Turning Toolholders
Including (1) Iscar AVC-Set 16-25 Whisper Line Anti Vibration Leveller. - LOT 248
![site]()
- LOT 249
![site]()
1 Lot Assorted Tooling
Including: (1) Cogsdill Universal Bushing Tool UBT-B2N. (1) Omega OM32508 Floating Reamer Holder. Collet Holder & Rotating Centre. - LOT 251
![site]()
1 Lot Assorted Indexable Insert Drill Bodies
Including Unused Iscar DR-MF-12R-2.250-16A-06 Multi Function Indexable Holders. - LOT 255
![site]()
(6) Assorted CNC Turning Centre Static Toolholders
Including Boring, Parting & Face Turning Static Holders. - LOT 258
![site]()
(6) Assorted CNC Turning Centre Static Toolholders
Including Boring & Parting Static Holders. - LOT 261
![site]()
1 Lot Assorted Tooling
Including: (1) Kintek KH1-25C Grip. (3) Assorted Rohm MK3 Revolving Centres. - LOT 262
![site]()
- LOT 265
![site]()
6-Drawer Steel Work Cabinet with Tooling
Dimensions Approx 600mm x 600mm x 840mm. Including Machine Bed Clamping Aids. - LOT 270
![site]()
- LOT 275
![site]()
(2) Louvre Racks & Cabinet with Tooling
Comprising: (1) Double Sided Louvre Rack 1,000mm x 1,900mm High with Chuck Soft Jaws & Machine Bed Clamping Aids. (1) Single Sided Mobile Louvre Rack 870mm x 1,800mm High. (1) 2-Door Steel Cabinet 1,000mm x 390mm x 1,500mm. Assorted Plastic Storage Bins. - LOT 281
![site]()
Adam CPWPLUS-300 Digital Floor Scale
300kg Capacity. d=0.1kg. Dimensions of Platform 900mm x 600mm. - LOT 284
![site]()
- LOT 285
![site]()
1 Lot Assorted Tooling
Including 1/2" Sq Drive Chrome Vanadium Sockets, Spanners, HSS Reamers, Abrasives, Hexagon Keys, Safety Equipment, Ear Protectors & Files. - LOT 287
![site]()
- LOT 290
![site]()
Assorted Tooling
Comprising: Unused Sine Bar CL-30-003, 15/16" x 5". V Block & TOS Ø100mm 3 Jaw Manual Lathe Chuck. - LOT 291
![site]()
- LOT 292
![site]()
- LOT 295
![site]()
Assorted Inspection Equipment
Including: Hoffmann Steel Rollers. Mitutoyo Holtest .425"-.500" Range Bore Micrometer. Moore & Wright Extension Rods. Assorted Gagemaker Thread Rolls. - LOT 297
![site]()
- LOT 303
![site]()
Mitutoyo 468-922 Holtest Digimatic Bore Gauge Set, .5"-.8" Range in Wooden Case
(1) Gauge .5"-.65" Range & (1) Gauge .65"-.8" Range. Complete with 177-182 Setting Ring .64975". - LOT 304
![site]()
Mitutoyo 468-922 Holtest Digimatic Bore Gauge Set, .5"-.8" Range in Wooden Case
(1) Gauge .5"-.65" Range & (1) Gauge .65"-.8" Range. Complete with 177-182 Setting Ring .64975". - LOT 305
![site]()
(2) Mitutoyo Holtest Bore Gauges
Comprising: (1) 468-921 Digital Bore Gauge Set with (1) .35"-.425" Range Gauge & (1) .425" -.5" Range Gauge, (1) 177-179 Setting Ring .34990" in Wooden Case. Additionally (1) 368-806 Holtest Bore Gauge 1.2"-1.4" Range. - LOT 306
![site]()
(5) Assorted Digital Gauges
Comprising: (2) Mitutoyo 500-196-30 Digital Vernier Calipers 0-150mm Range. (1) Mitutoyo 0-150mm Range Digital Vernier Caliper. (1) Mitutoyo 571-211-30 Digimatic Depth Gauge, 0-150mm Range. (1) 0-300mm Range Digital Machine Linear Scale (As New). - LOT 307
![site]()
1 Lot Assorted Diatest Bore Gauges
Comprising: (1) Diatest Imperial Bore Gauge Set. (1) 511 Series Mitutoyo 2"-6" Range Bore Gauge Set. (1) Assorted Extension Rods. - LOT 309
![site]()
(3) Assorted Toolmaker's Vices
Comprising: (2) 70mm Width of Jaw Vices & (1) 50mm Width of Jaw Vice. - LOT 310
![site]()
1 Lot Assorted Tooling
Including Assorted V Blocks. (1) Eclipse E934 Magnetic V Block (Dimensions 70mm x 100mm x 95mm). (1) Eclipse 901 Magnetic Base Only. - LOT 311
![site]()
1 Lot Assorted Tooling
Comprising: (1) Laser 60mm Width of Jaw Toolmaker's Vice. (1) Indexa Ø100mm 3 Jaw Manual Lathe Chuck with Key. - LOT 312
![site]()
1 Lot Assorted Tooling
Comprising: (1) Micrometer Stand. (1 Set) Pryor Interchangeable Stamps & Holder. (1) Mitutoyo Profile Projector Plain Stage Glass 152mm x 152mm. - LOT 313
![site]()
(13) Assorted Outside Micrometers
Including: (2) Mitutoyo 0-1" Micrometers. (1) Starrett 210-MA Screw Thread Comparator Micrometer 0-22mm Range. (1) Moore & Wright 966, 1"-2" Micrometer. (1) Moore & Wright 1966B, 2"-3" Micrometer. (1) Mitutoyo 2"-3" Micrometer. (1) Mitutoyo 103-185, 8"-9" Micrometer. (1) Moore & Wright 1966B, 1"-2" Micrometer. (1) Moore & Wright 0-1" Micrometer. - LOT 314
![site]()
(11) Assorted Outside Micrometers
Including: (1) Moore & Wright 948, 12"-16" Interchangeable Anvil Micrometer. (1) Mitutoyo 103-132, 1"-2" Micrometer. (1 of Each) Moore & Wright 0-1", 1"-2", 2"-3", 3"-4", 4"-5" & 8"-9" Micrometers. - LOT 316
![site]()
(8) Linear Metric Outside Micrometers 100mm-300mm Range with Setting Rods in Wooden Box
Comprising: (1 of Each) 100mm-125mm, 125mm-150mm, 150mm-175mm, 175mm-200mm, 200mm-225mm, 225mm-250mm, 250mm-275mm, 275mm-300mm. - LOT 317
![site]()
(7) Linear Imperial Outside Micrometers 4"-12" Range with Setting Rods in Wooden Box
Comprising: (1 of Each) 4"-5", 5"-6", 6"-7", 7"-8", 9"-10", 10"-11" & 11"-12". - LOT 319
![site]()
Diatest Comparator Stand with Mitutoyo Dial Gauges
Including: (1) Mitutoyo 543-391B Dial Gauge & (1) Mitutoyo 543-471B Dial Gauge. - LOT 320
![site]()
1 Lot Assorted Hand Tools
Including: Bench Clamp, Spanners, Pliers, James Magnus Etcher & Kyowa 390136 Bench Microscope (For repair). - LOT 321
![site]()
- LOT 324
![site]()
1 Lot Assorted Inspection Equipment
Including: Benson 500mm/20" Height Gauge with Mercer Dial Gauge. Mitutoyo 0-1" Depth Micrometer. (2) Linear 0-1" Depth Micrometers. SPI 20-940-3 'No Force' Groove Micrometer, 0-25mm Range. Tesa Setting Rings. Mitutoyo 178-394 Deep Groove Detector. Mitutoyo 02AGD130 (LSM503) 1mm-30mm Calibration Gauge Set (As New). YPG Pin Blade Set, Imperial. - LOT 326
![site]()
(3) Digital Micrometers
Comprising: (1) Mitutoyo 293- 345-30 Digital Micrometer, 1"-2" Range. (1) Moore & Wright 25mm-50mm Range Micrometer. (1) Baty 25mm-50mm Range Micrometer. - LOT 327
![site]()
(3) Digital Micrometers
Comprising: (1) Mitutoyo 293- 341-30 Digital Micrometer, 1"-2" Range. (1) 0-25mm Range Micrometer. (1) Mitutoyo 293-766-30, 0-1" Range Micrometer. - LOT 328
![site]()
Metal 4 Tray Cabinet with Steel Pin Gauges
Range of Pin Gauges .062"-.4995". Dimensions of Cabinet 480mm x 300mm x 320mm High. - LOT 329
![site]()
Metal 4 Tray Cabinet with Steel Pin Gauges
Range of Pin Gauges .062"-.4995". Dimensions of Cabinet 480mm x 300mm x 320mm High. - LOT 330
![site]()
Steel 3 Tier Cabinet with Assorted Grinding Attachments
Including Assorted Grinding Wheels, Flanges, Hubs, Adaptors & Wheel Shafts. Centre Balance, Grinding Attachments. - LOT 331
![site]()
Steel 4 Tier Cabinet with Assorted Grinding Attachments
Including Borazon Mounted Points, CBN Mounted Points, Grinding Wheels, Flanges, Hubs & Adaptors. - LOT 332
![site]()
18 Drawer Steel Cabinet with Assorted Grinding Accessories
Including HSS Drill Blanks. Sunnen Honing Mandrels, Stone Retainers, Adaptors & Wedges. Single End YPG Plain Plug Gauges. - LOT 333
![site]()
- LOT 334
![site]()
9 Drawer Steel Cabinet with Assorted Grinding Accessories
Including Assorted Delapina Speedhone Mandrels. Shoe Mandrels. Stone Retainers, Adaptors & Wedges. Double Ended Plain Plug Gauges. Mounted Points. - LOT 335
![site]()
24 Drawer Wooden Cabinet with Assorted Grinding Accessories
Including Mandrels, Resin Grinding Wheels, Backing Plates, Flanges & Hubs. ER Collets, Spanners. Assorted Grinding Wheel Spares. - LOT 336
![site]()
24 Drawer Wooden Cabinet with Assorted Grinding Accessories
Including Hand Tools, Grinding Wheels, Adaptors & Backing Plates. - LOT 338
![site]()
Worktable & Rack with Tooling
2-Drawer Single Door Worktable with Assorted Centres & Hexagon Keys. Adjustable Louvre Rack with Plastic Bins. - LOT 339
![site]()
- LOT 340
![site]()
- LOT 341
![site]()
- LOT 342
![site]()
- LOT 343
![site]()
- LOT 344
![site]()
- LOT 345
![site]()
- LOT 346
![site]()
2 Door Steel Shop Floor Cabinet with Contents
Including Plastic Storage Bins & Assorted Tooling. - LOT 347
![site]()
- LOT 348
![site]()
- LOT 349
![site]()
- LOT 350
![site]()
4 Drawer, 2 Door Work Cabinet with Wood Work Top & Tooling
Includes Machine Bed Clamping Aids, ER Collets, Soft Jaws, Arbors, Indexable Carbide Inserts & Holders. - LOT 351
![site]()
- LOT 352
![site]()
- LOT 359
![site]()
(6) BT30 Arbors with Assorted Tooling
Including Assorted Collets & Indexable Insert Milling Bodies. - LOT 360
![site]()
- LOT 361
![site]()
- LOT 362
![site]()
- LOT 363
![site]()
- LOT 364
![site]()
- LOT 365
![site]()
- LOT 366
![site]()
6 Drawer Steel Workshop Cabinet with Machine Bed Clamping Aids
Dimensions Approx 600mm x 600mm x 890mm. - LOT 367
![site]()
- LOT 368
![site]()
- LOT 369
![site]()
- LOT 370
![site]()
2 Door Steel Workshop Cabinet with Senator 75mm Width of Jaw Vice & Tooling
Including Assorted Machine Clamping Aids. - LOT 371
![site]()
- LOT 372
![site]()
4 Drawer, 2 Door Work Cabinet with Wood Work Top & Tooling
Including Assorted Fixtures & Grinding Wheel. - LOT 373
![site]()
- LOT 374
![site]()
4 Drawer Steel Workbench with Wood Work Top
Including Assorted Hexagon Keys. Dimensions Approx 1,155mm x 700mm x 900mm. - LOT 375
![site]()
- LOT 376
![site]()
- LOT 377
![site]()
- LOT 378
![site]()
(4) Assorted Boltless 3 Tier Racking
Comprising: (1) 1,870mm x 600mm x 2,000mm. (1) 2,810mm x 600mm x 2,000mm. (1) 1,900mm x 585mm x 2,000mm. (1) 2,870mm x 600mm x 2,000mm. - LOT 379
![site]()
- LOT 380
![site]()
- LOT 381
![site]()
- LOT 385
![site]()
- LOT 386
![site]()
- LOT 387
![site]()
- LOT 388
![site]()
(2) Stainless Steel PS-100A Ultrasonic Cleaner Units
30 Litre Capacity, Tank Size 500mm x 300mm x 200mm. 240 Volt. Single Wire Basket. - LOT 389
![site]()
- LOT 390
![site]()
- LOT 391
![site]()
Assorted Tooling
Comprising: (1 Set) Schaublin Collet Holders, Threaded Shank in Wooden Case. (2) Angle Plates. (1) Probe Test Ring. - LOT 392
![site]()
(2) Steel Tool Cabinets
Comprising: (1) 16 Drawer Tool Cabinet (Dimensions 720mm x 710mm x 1,000mm). & (1) 7 Drawer Tool Cabinet (Dimensions 705mm x 750mm x 1,025mm). - LOT 393
![site]()
Multi Drawer (56 Bins) Steel Tool Cabinet with Large Quantity of Plain Plug Gauges
Dimensions Approx 880mm x 470mm x 1,760mm. - LOT 394
![site]()
Avery 3901 AAG 250kg/5cwt Mobile Platform Scales
Platform Dimensions 400mm x 600mm. Serial Number S-793380. - LOT 395
![site]()
Hydraulic Scissor Lift Table
Dimensions of Platform 600mm x 1,070mm. Height Capacity from Approx 550mm - 870mm Max. - LOT 396
![site]()
- LOT 397
![site]()
Samand TG1 67/292 Heavy Duty Double Ended Floor Mounted Tool Grinder
Power Supply 440 Volt, 3 Phase. - LOT 398
![site]()
- LOT 400
![site]()
Welconstruct 18 Bin Storage Cabinet
Complete with Assorted Ring Shaped Steel Gauges, Double Ended & Single End Plain Plug Gauges & Screw Ring Gauges. - LOT 401
![site]()
- LOT 402
![site]()
1 Lot Assorted Inspection Tooling
Including: (1 of each) 5°, 12.5°, 18° & 20° Steel Angle Gauge Blocks in Wooden Box. (4 Sets) Assorted Steel Pin gauges (Pieces missing). Mitutoyo 513-415-10 Dial Test Indicator. Verdict T3 DTI. (2) V Blocks. Assorted Small Hole Gauges. Ceratizit 10005884/S12-3 Unused Spanner Wrench. - LOT 403
![site]()
1 Lot (Approx 65) Indexable Carbide Threading Inserts (Unused)
Including ACME Thread Inserts In Plastic 20 Drawer Cabinet - LOT 404
![site]()
- LOT 405
![site]()
(3) Assorted Cabinets
(1) Dimensions 290mm x 390mm x 720mm with Assorted Masonry Drills. (1) 300mm x 150mm x 280mm. (1) 540mm x 390mm x 360mm. - LOT 406
![site]()
1 Lot Assorted Tooling
Including (2 Sets) Thame PT10 Steel Soft Jaws (Unused). (1 Set) Thame AP10 Aluminium Soft Jaws (Unused). Assorted Borazon Mounted Points. Assorted Spanners & Hexagon Keys. - LOT 407
![site]()
1 Lot Assorted Tooling
Including: (1) Iscar SOF458/16-D080-07-27R Unused Indexable Milling Cutter Body. (1) Iscar Indexable Milling Cutter Body. Assorted Indexable Carbide Inserts. HSS Drills & HSS T Slot Cutters. - LOT 408
![site]()
- LOT 410
![site]()
- LOT 411
![site]()
- LOT 412
![site]()
- LOT 413
![site]()
- LOT 414
![site]()
Essential Information
General Information
- Auction Dates
- Starts: 19 May 2026 at 16:30 BSTEnds: 30 June 2026 at 15:00 BST
- Site Address
- 1 South MarchDaventryNorthamptonshireNN11 4PHUnited Kingdom
- Viewing Days
- By Appointment Only
Fees & Payment
- Currency
- GBP
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 06 July 2026 at 09:00 BST - 10 July 2026 at 16:00 BSTCollections strictly by appointment only.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationAnais Tournois69 Middle Street
Brighton
Please Select
BN11AL
United Kingdom info@apexauctions.co.uk+44 1273 224466